|
3D Personal
Cinema
- 64MB GeForce2™ MX400™
- 200MHz core clock
- 2nd-generation T&L
Engines
- 800M texel Fill Rate
- >20M
triangles/sec through T&L and Setup –
- 2.7GB/sec Memory Bandwidth
- AGP
4X support, with Fast Writes
 SoundBlaster
4.1
- Creative synthesis engine.
- 128-voice
polyphony and multi-timbral capability.
- Digital
effects engine for reverb and chorus.
- Equipped
with 2MB, 4MB and 8MB sample sets included.
- 16 MIDI channels, 128 GM and
GS compatible instruments, 10 drum kits.
- MT-32 compatible instrument
set.
SoundBlaster 5.1
- Sound
Blaster® 16 Emulation in DOS box and real mode DOS.
- Playback
of 64 audio channels each at an arbituary sample rate.
- Each
audio channel can function as a WaveTable Synthesizer voice.
- Each
audio channel can playback either 8 bit or 16 bit data from host memory.
- Pairs
of audio channel can be programmed to play 8 or 16 bit interleaved data from
host memory.
- 48kHz
recording from AC97 sample rate converted to 8 common rates to host memory.
- Playback
Recording Sources: CD_IN, AUX_IN, LINE_IN, MIC_IN, TAD,
MIDI
and Wave, CD-SPDIF IN.
- Full
duplex recording and playback.
 SoundBlaster Audigy
II
- 24-bit
Digital-to-Analog conversion during playback with sampling rates of 8,
11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz in 6.1 mode and up to 192kHz
in stereo mode
- 24-bit
Analog-to-Digital conversion during recording in 8, 16 or 24-bit at sampling
rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
- SPDIF
output up to 24-bit at 48 or 96kHz
- ASIO™
drivers for low latency (as low as 2ms) multi-track playback and recording
at 16-bit/48kHz
SoundBlaster Audigy II
Platinum
- 24-bit
Digital-to-Analog conversion during playback with sampling rates of 8,
11.025, 16, 22.05, 24, 32,
- 44.1,
48 and 96kHz in 6.1 mode and up to 192kHz in stereo mode
- 24-bit
Analog-to-Digital conversion during recording in 8, 16 or 24-bit at sampling
rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
- SPDIF
(Sony/Philips Digital Interface) input at up to 24-bit/96kHz quality
- SPDIF
output up to 24-bit at 48 or 96kHz
- ASIO™
drivers for low latency (as low as 2ms) multi-track playback and recording
at 16-bit/48kHz
 SoundBlaster Audigy II
Platinum EX
- 24-bit
Digital-to-Analog conversion during playback with sampling rates of 8,
11.025, 16, 22.05, 24, 32, 44.1, 48, 64, 88.2 and 96kHz in 6.1 mode and up
to 192kHz in stereo mode
- 24-bit
Analog to Digital conversion during recording in 8, 16 or 24-bit at sampling
rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48, 64, 88.2 and 96kHz
- SPDIF
(Sony/Philips Digital Interface) input at up to 24-bit/ 96kHz quality
- SPDIF
output up to 24-bit at 44.1, 48 or 96kHz
- ASIO™
2.0 drivers for low latency (as low as 2ms) multi-track playback and
recording at 16-bit/ 48kHz or 24-bit/96kHz
SoundBlaster Extigy
External USB
- High
Signal-to-Noise Ratio (SNR) exceeding 100dB using high linearity, low
distortion 24-bit converters with resolutions of up to 96kHz
- 24-bit
/ 96kHz Analog-to-Digital Converter (ADC) for various analog inputs
- 24-bit
/ 96kHz Digital-to-Analog Converter (DAC) for 6-channel analog speaker and
headphone outputs
- Supports
Sony/Philips Digital Interface (SPDIF) format input signal of up to 24-bit /
96kHz quality
 Speaker Creative
SBS250
- Power Specifications
- 2.5 Watts (RMS) per channel
- Frequency Response 90 Hz to
20 kHz
- Signal To Noise Ratio 75 dB
- Affordable,
stereo powered speakers with front-mounted controls.
- Green
LED indicator indicates on/off status.
- Headphone output.
- Magnetically
shielded for close placement to PC monitor without causing interference.
- Ideal
for users who demand excellent PC multimedia audio..
Speaker Creative Slim
2700
·
Power
Specifications
- 8
Watts (RMS) per satellite (x2)
- 19 Watts (RMS) subwoofer
- Frequency Response 30Hz-20
kHz
- Heavily
reinforced, 19-Watt RMS cube-style subwoofer with protective coating for
solid bass and durability.
- Attractive
8-Watt RMS super slim satellites complement flat panel monitors and notebook
computers. Detachable stands ensure easy
location, on desk or wall.
- Frequency
range between 30Hz and 20kHz for maximum performance with any stereo source.
- Magnetic
shielding on satellites safeguards computer monitors.
- Wired
remote control with power switch and LED indicator for comfort and
convenience.
 Speaker Inspire 2400
2.1
·
Power
Specifications
- 4.5
Watts
(RMS) per satellite (x2)
- 12 Watts (RMS) subwoofer
- Frequency Response 42Hz-20
kHz
- Signal to Noise Ratio
>75dB
- Optimised
for any Sound Blaster® card or stereo source.
- Heavily
reinforced cube-style subwoofer for solid bass, and 'contour-around'
satellite drivers for optimum sound dispersion and precise sonic imaging.
- Ergonomic
volume control for comfort and convenience.
- Magnetic
shielded satellites avoid interference with monitors.
- Attractive
new design enhances any setting. Protective coating for
durability.
Speaker Inspire 4400
4.1
- Power Specifications
- 6
Watts (RMS) per surround satellite (x4)
- 17 Watts (RMS) subwoofer
- Frequency Response 40Hz to
20kHz
- The
upgrade choice for more dynamic gaming and music enjoyment.
- Optimised
for better EAX® and DirectSound® impact.
- New,
all-wood 17 Watt RMS subwoofer engineered for 3D positional excellence and
bass impact.
- Magnetically
shielded satellite units of 6 Watts RMS are balanced for richness, detail
and focus and safeguard other desktop electronics.
- Wired
master remote control with volume control, power switch and LED
indicator.
 Speaker Inspire 5100
5.1
- Power
Specifications
- o 6
Watts (RMS) per surround satellite (x5)
- o 12 Watts (RMS)
subwoofer
- o Frequency Response
44Hz-20kHz
- o SNR 84 dB
- Enhanced
5.1 sound quality on EAX® and Microsoft® DirectSound® 3D
- supported
games. The ideal 5-channel upgrade.
- Heavily
reinforced, cube-style subwoofer with solid bass and protective
- coating for durability.
- Special
amplifiers tailored for smooth, natural, surround sound.
- Compact
and elegant design enhances any desktop setting.
- Ergonomically
designed remote volume control with power on/off LED
- indicator.
Speaker Inspire 5500
5.1
- Dolby
Digital® and Dolby Pro Logic processing for awesome surround sound
- Heavily
reinforced wood subwoofer with 6-channel amplification for an enhanced audio
experience
- Line-in,
digital coaxial and optical inputs for multiple connectivity to DVD players
and other devices
- Wireless
remote control with key functions for convenient control
- New
sleek decoder with elegant silver front panel to suit any environment
 Speaker Inspire 5700
5.1
·
Power
Specifications
- 7
Watts (RMS) per surround satellite (x 4)
- Powerful 30 Watts (RMS)
SLAM subwoofer
- 21 Watts (RMS) centre
channel
- Frequency Response 35Hz to
20kHz
- SNR
76dB
- Compatible with 24bit/96kHz
devices
- Maximum
6-channel digital performance with any Sound Blaster® Audigy™ or Live!™ 5.1
series sound card
- High
connectivity - optical, coaxial, analogue stereo and digital DIN
- CMSS™
up-mixes any 2-channel stereo to a 5.1 sonic sound field
- Decoder/amplifier
and wireless remote control gives complete functional
management
Speaker Inspire 6700
5.1
- Supports
Dolby Digital® Surround EX playback when used with Sound Blaster® Audigy™ 2
card and Creative® Multi-Speaker System (CMSS™) technology
- Up-mixes
surround to 6.1 channels when used with a 5.1 sound card
- Reinforced
wood subwoofer with long-throw 6.5-inch driver and dual flared port tubes
for clean bass.
- Larger,
more powerful centre satellite for clear vocal/dialogue.
- Flexible
wired remote volume control with power switch and bass adjustment plus
headphone out for private listening.
 Speaker Megaworks 5.1
Thx
- Power Specifications:
- 500 Watts Total Burst Power
- 70
Watts (RMS) per surround satellite (x5)
- 150 Watts (RMS) subwoofer
- Frequency response:
- Satellites 150Hz-20kHz
- Subwoofer
25Hz-150Hz
- SNR
99dB
- Satellite
speakers are wall-mountable, capsule-shielded and tuned, with precision
3.5-inch drivers and rare-earth magnets to deliver ultra smooth output to
audiophile and THX® standards
- Wood
subwoofer with dual flared ports incorporates heavy-duty, long-throw 8-inch
down-firing driver for true subsonic impact
- BASH®
amplification offers 500 Watts of burst power for distortion-free, lifelike
playback levels
- Multi-featured
wired remote control with comprehensive speaker controls to ensure
flexibility
- Enhanced
5.1 sound quality with THX®, EAX® and Microsoft® DirectSound® 3D supported
games when connected to Sound Blaster® Audigy™ or Live!™ series sound
cards
|
